CinCraft Origin is the center piece of the tracking ecosystem, running Scenario, our main software interface to set up and perform camera tracking. It aggregates the raw data from CinCraft CamBar and computes position and movement in real-time with very low latency. It can store tracking data locally and stream it to real-time renderers such as Unreal Engine, Disguise and a host of others.

Cincraft Link is a small, lightweight, fanless system that can be rigged on the main camera in place of the bigger CinCraft Origin. It receives raw data from CinCraft CamBar and transmits over a wired connection to CinCraft Origin which is setup elsewhere.

CinCraft CamBar is our camera-mounted sensor that captures raw data via the Scenario software. It's small, lightweight and includes an integrated IR emitter and synchronization technology to allow for tracking in most environments – indoors and outdoors, natural tracking or reflective marker tracking. The CamBar can be connected to CinCraft Origin directly or through CinCraft Link.

A pack of filters containing ND filters (3 filters) to control exposure within bright lighting conditions and IR filters (2 filters) where marker tracking is a necessity.

The CinCraft Scenario Calibration Charts are used for basic setup and calibration steps inside the CinCraft Scenario software.

One A3 sheet of circular reflective markers with a diameter of 3cm.

One A3 sheet consisting of a mix of Circular reflective markers with diameters measuring 6cm and 3cm.

One A3 sheet consisting of a mix of Circular reflective markers with diameters measuring 12cm, 6cm and 3cm.

A spacious transport case with a custom two-tier laser cut foam insert solution for all the main CinCraft Scenario hardware, cables and accessories.

The CinCraft Scenario /i & XD cable can be connected to the 4 pin data port on compatible /i and XD lenses. This allows for the reading of focus, iris and zoom information (FIZ) from the lens, and in the case of XD, lens distortion data can also be utilised.

The CinCraft Scenario LCUBE cable can be used in conjunction with an LCUBE-1 and compatible LBUS lens motors, such as CForce Mini or Plus. The cable connects to the Serial port on the LCUBE-1 and allows the reading of focus, iris and zoom information (FIZ) from the lens motors.

The CinCraft Scenario external encoder set is a pair of passive encoders that can be used to gather focus and zoom data from a lens. The encoders are compatible with lenses that use either 0.5, 0.6 or 0.8 pitch barreling via swappable gears. The set includes mounts for both 15mm and 19mm rods as well as a mounting bracket for ENG style broadcast lenses.

Compatible with the Preston MDR 3 and 4 motor driver units, the CinCraft Scenario Preston Serial Cable can read focus, iris and zoom information (FIZ) from the lens when connected to the serial port of the MDR device.

Compatible with the Teradek MDR.X device, this cable can read focus, iris and zoom information (FIZ) from the lens motors when connected to the "In-1" or "In-2" ports on the MDR.X unit.

Works with the Tilta Nucleus-M motor/encoder system, encoding FIZ data

The Lemo 2 pin power cable allows the CinCraft Origin or CinCraft Link to be powered by cameras or accessories that feature 2 pin lemo power outputs.

The Fischer 3 pin power cable allows the CinCraft Origin or Link to be powered by cameras or accessories that feature 3 pin fischer power outputs.

For powering either the CinCraft Origin or CinCraft Link from cameras utilising a 4 pin hirose power output.

The DTap cable can power either the CinCraft Origin or CinCraft Link from cameras or batteries that provide a Dtap power output.

The XLR Y-Split cable can be used with cameras that are powered via a 4 pin XLR power source. The Y-split cable allows for input power to be shared by either the CinCraft Orign or CinCraft Link.

The external power supply unit allows for powering the CinCraft Origin or CinCraft Link devices from a conventional wall socket.

The CinCraft Scenario Base Bundle is an economical offering that includes only the minimum hardware needed to track in all environments. It features the CinCraft Origin and CinCraft CamBar, as well as the basic accessories such as transport case, calibration charts, filters, power cables and the /i and XD encoder cable for interfacing with compatible lenses. <br> <br> Includes 5 free sheets of CinCraft Scenario 6cm Circular Markers. <br> <br> It is highly recommended to have a look at our power supply and encoder cable solutions to tailor to your specific operation requirements.

The CinCraft Scenario Advanced Bundle is primarily aimed at rental facilities and includes all of the hardware included in the Base Bundle. In addition, it includes the CinCraft Link, which allows the user to set the CinCraft Origin up remotely from the main camera. The bundle also includes compatible cables for powering up the CinCraft Scenario equipment from the main camera. With compatible lenses. <br> <br> Includes 5 free sheets of CinCraft Scenario 6cm Circular Markers. <br> <br> It is highly recommended to have a look at our encoder cable solutions to tailor to your specific operation requirements.

The CinCraft Scenario Advanced Plus Bundle is a fully comprehensive hardware and software bundle which adds a one year software subscription for CinCraft Scenario and CinCraft Wrangler to the Advanced Bundle. This gives users hassle free access to all Scenario features for one year. The provided hardware allows the system to be powered across all commonly used camera hardware. With compatible lenses. <br> <br> Includes 5 free sheets of CinCraft Scenario 6cm Circular Markers. <br> <br> It is highly recommended to have a look at our encoder cable solutions to tailor to your specific operation requirements.

The CinCraft Scenario Advanced Broadcast Bundle is primarily aimed at Broadcasters and offers all the hardware elements of the Advanced Bundle and a long term three-year license for CinCraft Scenario. This gives users the access to all Scenario features for three years and the provided hardware allows the system to be powered across all commonly used camera hardware. With compatible lenses. <br> <br> Includes 5 free sheets of CinCraft Scenario 6cm Circular Markers. <br> <br> It is highly recommended to have a look at our encoder cable solutions to tailor to your specific operation requirements.